Product Name :Hospital Single-Channel Infusion Pump

The infusion pump is usually a mechanical or electronic control device that acts to control the infusion rate by acting on the infusion catheter. It is often used in situations where strict control of infusion volume and dose is required, such as when applying a booster drug, an antiarrhythmic drug, intravenous infusion or intravenous anesthesia.

The infusion pump is an instrument that can accurately control the number of droplets or infusion flow rate, ensure the uniformity of the drug, and accurately and safely enter the patient's body. It is also an intelligent infusion device, and the infusion rate is not Affected by human back pressure and operator, the infusion is accurate and reliable, which helps to reduce the intensity of clinical nursing work, improve the accuracy, safety and quality of care

1) Flow Rate Range 0.1-1000Ml/h

2) Matched Tube Type Match all types(PVC), The special tube should contact supplier

3) Adj. Infusion Range 999Ml

4) Infusion Precision  ±3%(Adj.)

5) KVO Speed 1-3Ml/h

6) Beep & Led Alarms Power switch/occlusion/air in tube/door open/infusion finished/low battery/no operate/tube error installed/ no medicine liquid/tube spoilage

7) Drop Ctl Precision  Drop Precision ±1%（Speed≤360Ml/h）

8) Drop Scan Sensor IR

9) Air Scan Sensor  Ultrasonic

10) Pressure Range  30Kpa-160Kpa (High, Middle, Low Adj.)

11) Beep Adj.Range High, low

12) Ac Power  AC100V-240V±10% 50Hz-60Hz

13) Insider Battery NI-MH Battery(12V): Infusion time≈4hours with battery

14) Lithium cell(12V): Time≈6-12hours with battery

15) Power consumption  Less than 18VA

16) Security Classification  Class I, BF type

17) Working Condition  Temperature±5°C-+40°C  Humidity 20%-90%

18) Purge  Yes

19) Ml/h: drop/min Auto Change

20) Dimension  148*108*210mm

21) Weigh (kg) 2.3kg